Fabric Care Guide
Use this guide to clean, rinse and protect fabric couches, recliners, upholstery, rugs and carpets with CouchGuard fabric care products.
Suitable fabrics and materials
CouchGuard fabric care products are intended for water-safe upholstery and fabrics, including many fabric couches, man-made suedes, microfibres, linens, rugs and carpets. Materials and dyes vary, so always test on a small hidden area first. Do not continue if the test causes colour transfer, staining or texture changes.
Before you start
- Read the directions for the specific product.
- Test on a hidden area and allow it to dry.
- Use clean white cloths to avoid colour transfer.
- Blot stains rather than rubbing.
- Avoid over-wetting the fabric.
- Protect nearby floors and surfaces from overspray.
How to use Fabric Spotter
- Blot excess stain deposits with a clean white cloth.
- Lightly spray Fabric Spotter onto the affected area. Do not over-wet.
- Lightly agitate and allow it to dwell for five minutes.
- Add 30ml of CouchGuard Rinse Aid to one litre of clean water.
- Dampen a clean white cloth in the solution and blot from around the stain towards its centre. Rinse the cloth regularly. Do not rub.
- Repeat if necessary, then blot away excess moisture with a dry white cloth.
- Once dry, vacuum away residue. If the stain has been removed, lightly mist the area with Fabric Protector, allow it to dry and repeat.
How to use Rinse Aid
- Add 30ml of Rinse Aid to one litre of clean water.
- Dampen a clean white cloth with the solution and blot the spill.
- Blot excess moisture with a dry white cloth.
- For stubborn stains, use Fabric Spotter according to its directions.
How to apply Fabric Protector
The surface must be clean, dry and free from dirt, dust, stains and existing coatings. Always test on a hidden area first.
- Evenly spray one wet coat over the selected area.
- Immediately repeat using a different spray direction to maximise even coverage. Apply two coats wet-on-wet.
- Allow the fabric to dry completely before use. Drying generally takes at least one hour, but weather, airflow, humidity and fabric type can extend the time.
Protect nearby flooring from overspray. Use appropriate personal protective equipment during application.
Fabric care FAQs
How long does Fabric Protector last?
It generally lasts approximately 18 to 24 months. Actual durability depends on use, wear, cleaning frequency and the cleaning solutions used.
Can I use Fabric Protector on rugs and carpets?
It can be used on new or freshly cleaned rugs and carpets that are suitable for water-based treatment. Always test a hidden area first.
Can I apply it after steam cleaning?
Yes. Let the upholstery become almost dry after steam cleaning, apply the protector as directed, then allow it to dry completely before use.
Does Fabric Protector need to be mixed?
No. CouchGuard Fabric Protector is supplied ready to use.
How long does it take to dry?
Allow at least one hour under suitable conditions. Drying can take longer depending on weather, airflow, humidity, fabric and application.
Is it suitable for every fabric?
No product should be assumed suitable for every material. Test on a small hidden area first and do not use it if water or the product affects the material or dye.
What if I am unsure?
Contact CouchGuard before treating the visible area.