Place a drop sheet or old towels around the recliner
Remove the two retaining screws from the trigger release handle.
Gently turn the recliner over remember correct lifting methods.
Locate the exposed cable end.
Manually open the recliner action by levering on the main actuator tube holding the foot rest section not letting it to fling open.
Using a pair of pointy noise pliers” clamp the plastic cable retaining clip clips together and remove from the recliner action frame.
Locate the “S” end of the cable and remove from the operating pivot. Holding the cable in one hand and the plastic trigger end in the other guide the complete unit out thru the trigger release end opening.
Check the new trigger release and cable for correctness before fitting.
Feed the new trigger release and cable thru the trigger opening end.
With the new plastic trigger release handle sitting in the correct position re-fasten it to the recliner.
Attach the “S” end of the cable to the operating pivot, then the plastic retaining clip to the recliner action frame. Test the new trigger release for smooth operation.
Gently close the foot rest and turn the recliner back over.
Sit in the recliner and open the foot rest using the new trigger release and check for a smooth operation.
