How to Fit A Recliner Cable | Couchguard Aus.

How to Fit A Recliner Cable 

Removing & Fitting A Recliner Cable From Handle

1. With the handle already out, locate where the black cable sheath clips into the handle.
2. Remove the wire retaining clip that loops over the cable with a small flat blade screw driver.
3. Unclip the cable from the handle, remove the barrel from the holder and dispose.
4. With the new cable, guide the barrel into the plastic handle barrel holder then clip the plastic sheath clip back into handle.
5. Replace the wire retainer over the cable and clip one side at a time back into place.
6. Test the new cable for smooth operation before refitting to recliner.