Buy Universal Recliner Battery Isolating Switch

Universal Recliner Battery Isolating Switch

Add a convenient on/off point at the output side of a recliner battery pack with a two-pin I0 battery connection. This inline isolating switch fits any two-pin I0 battery connection and is approximately 500 mm long. It lets you switch off the battery output when the chair is not in use without repeatedly unplugging the battery. It is a connection accessory, not a replacement battery or charger.

Product details

• Inline battery-output isolating switch for two-pin I0 battery connections.
• Fits any battery connection of the two-pin I0 type; a different two-pin connector is not the same connection.
• Approximate overall length: 500 mm, as listed in the existing product details.

Check your connection

Compare the connector on your battery with the two-pin I0 connection before ordering. “Universal” refers to this I0 connection type, not every kind of two-pin plug or every recliner battery. If you are unsure which connector you have, send CouchGuard photos of the battery label and both ends of the connection. Disconnect power before changing connections and do not force a different plug.

Frequently asked questions

Where does the switch connect?
Connect it on the output side of a battery pack with a two-pin I0 connection.

Does it fit any two-pin I0 battery connection?
Yes. It is intended to fit any battery connection of the two-pin I0 type. Other two-pin plug styles are not necessarily I0.

How long is it?
The existing listing specifies approximately 500 mm.

Will it increase battery capacity?
No. It switches the battery output on or off; it does not add capacity or replace proper charging and battery care.

Recliner Replacement Parts Manual - FAQ’s 

Do you stock Pegar recline parts?

No unfortunately. Pegar handles have been obsolete for many years and we don’t stock any cables suitable.

How do you measure a recliner spring?

Recliner springs are measured by the overall length. You’ll find a break down of each recliner spring on each of the products pages. Simply click or tap on the “Measuring” tab.

Can I get a different shade brown?

No. There is only 1 colour brown available worldwide. There is no choice what shade of brown it is sorry.

My recliner handle measures 113mm x 70mm. Will your handles still fit?

Yes. There can be a couple mm tolerances in the measurements given.

My recliner handle measures 11cm x 7cm. Will your handles still fit?

Yes. Converted to millimetres is 110mm x 70mm.

How do you measure a recliner cable? You need to remove the trigger and cable from the recliner, disconnect the cable from the handle and use the Cable Cheat Sheet that is on the website.

How do I measure a recliner cable?

Click or Tap on the “Measuring” tab on the products page and follow the Cable Cheat Sheet to measure your cable correctly. Make sure you disconnect your cable from the handle before measuring. If you cable has broken the barrel off of the end, simply add that measurement, 3.5 or 6mm to the overall length measurement.

Can I pick up from your Coolum Beach Warehouse?

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au