Buy Chendi HC-004 6-Button Lift Chair Handset, 5-Pin

Chendi HC-004 six-button lift chair handset

A wired six-button handset listed for a twin-actuator lift chair, with separate backrest and footrest adjustments. The existing listing describes a five-pin plug. Count all six buttons, including the two central buttons, when comparing your original control.

Check before ordering

• Match HC-004 on your original handset or chair documentation, if available.
• Compare the six-button layout and the functions of each button with your original controller.
• Check the plug shape, pin arrangement and chair control box. A five-pin plug alone does not guarantee fit or correct operation.

This is a handset, not a motor or control box. If you cannot identify the old handset, send CouchGuard photos of its front, any rear label and the connector before ordering. Disconnect chair power before replacing a handset.

Frequently asked questions

Is this a four-button handset? No. This listing describes six buttons; check the two central buttons when counting.

Does a five-pin plug make it universal? No. The chair's wiring, control box and button functions must match.

What chair functions is it listed for? The existing listing describes independent backrest and footrest adjustment on a twin-actuator lift chair. Check your original layout.

What should I send if unsure? Clear photos of the old handset face, model label and complete plug help identify a possible match.

Recliner Replacement Parts Manual - FAQ’s 

Do you stock Pegar recline parts?

No unfortunately. Pegar handles have been obsolete for many years and we don’t stock any cables suitable.

How do you measure a recliner spring?

Recliner springs are measured by the overall length. You’ll find a break down of each recliner spring on each of the products pages. Simply click or tap on the “Measuring” tab.

Can I get a different shade brown?

No. There is only 1 colour brown available worldwide. There is no choice what shade of brown it is sorry.

My recliner handle measures 113mm x 70mm. Will your handles still fit?

Yes. There can be a couple mm tolerances in the measurements given.

My recliner handle measures 11cm x 7cm. Will your handles still fit?

Yes. Converted to millimetres is 110mm x 70mm.

How do you measure a recliner cable? You need to remove the trigger and cable from the recliner, disconnect the cable from the handle and use the Cable Cheat Sheet that is on the website.

How do I measure a recliner cable?

Click or Tap on the “Measuring” tab on the products page and follow the Cable Cheat Sheet to measure your cable correctly. Make sure you disconnect your cable from the handle before measuring. If you cable has broken the barrel off of the end, simply add that measurement, 3.5 or 6mm to the overall length measurement.

Can I pick up from your Coolum Beach Warehouse?

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au