Buy eMoMo HX90HU2RDN Right-Hand Recliner Switch | USB-A & USB-C

eMoMo HX90HU2RDN right-hand recliner switch

The eMoMo HX90HU2RDN is an upgraded switch for right-hand operation when sitting in the recliner, on your left when facing the chair, for matching electric recliner installations. This version adds a USB-C charging point in place of the original HOME button, alongside USB-A charging and two rocker controls. It has an oval silver-coloured surround with a dark face panel and a round five-pin male plug.

Please note: this version has a USB-C charging port instead of a HOME button. Choose it only if this control layout suits your chair and requirements.

If you are looking for the HX90HUN, click here to view the original eMoMo HX90HUN right-hand-operated Recliner Switch with USB.

Product details

• Brand: eMoMo
• Model reference: HX90HU2RDN
• Series: HX90
• Position: right-hand side when seated, left when facing the chair, marked R
• Controls: two rocker controls; no HOME button
• USB ports: USB-A and USB-C; USB-C replaces the original HOME button
• Input rating: 29V DC, 2A
• Output rating: 5V DC, 2.1A
• Connection: round five-pin male plug
• Appearance: silver-coloured oval surround and dark face panel

Check compatibility before ordering

Match the HX90HU2RDN reference and right-hand orientation to your intended installation. Compare the rocker layout, mounting opening, fixing positions, connector keying, pin arrangement and chair wiring. A matching five-pin plug alone does not establish compatibility. This upgraded layout replaces the original HOME button with USB-C charging.

This is not a universal replacement for every eMoMo or HX90 switch, and it should not be selected as a left-hand replacement. Check the original side marking and installation before ordering. If unsure, contact CouchGuard on 1300 268 244 with clear photos of the original switch front, rear label, connector face and mounting area.

Replacement guidance

Disconnect the recliner from mains power and any battery backup before replacing the switch. Follow the chair manufacturer's instructions, align the connector correctly and do not force the pins or modify wiring. Keep the cable clear of moving mechanisms and pinch points.

Frequently asked questions

What is different about this upgraded switch?

The original HOME button is replaced by a USB-C charging point. This version has USB-A and USB-C ports, two rocker controls and no HOME button.

Is the HX90HU2RDN for the right-hand side?

Yes. This listing is for right-hand operation when sitting in the recliner, on your left when facing the chair, identified by the R marking. Match your original switch orientation and installation.

Does it have USB-A and USB-C?

Yes. The face panel has both USB-A and USB-C ports. The labelled output rating is 5V DC, 2.1A.

What connector does it use?

It has a round five-pin male plug. Match the pin arrangement, keying and wiring as well as the model reference.

What is the input rating?

The HX90 label specifies 29V DC, 2A input. Voltage alone is not enough to confirm compatibility with a chair system.

Will it replace any HX90 switch?

No. Confirm the HX90HU2RDN model, right-hand position, mounting and electrical connection suit your installation. Check that you want USB-C charging in place of the original HOME button.

Will replacing the switch fix a recliner that will not move?

Not necessarily. Power-supply, cable, control-box and actuator faults can cause similar symptoms. Identify the fault before replacing parts.

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au