Buy eMoMo RemoP10 Recliner Switch with USB

eMoMo RemoP10 Recliner Switch with USB

The eMoMo RemoP10 is a genuine round power-recliner switch with USB, a built-in control box and a right-angled five-pin male plug. It is designed for compatible recliner systems using the same switch, control box and connector arrangement.

Key details

• Manufacturer: eMoMo
• Model: RemoP10
• Part type: power-recliner switch
• Features: USB port and built-in control box
• Connection: right-angled five-pin male plug
• Identification: serial number on the side of the control box starts with EP10

Compatibility

Match the complete RemoP10 model, EP10 serial prefix, control-box layout, plug shape and pin arrangement with your original switch before ordering. The right-angled five-pin plug can connect where the matching straight five-pin connection is used.

This switch is not a direct replacement for the eMoMo RemoP20LR U or RemoP20LR. If you are unsure, send CouchGuard clear photos of the switch, control box, serial number and connector before purchase.

Frequently asked questions

How do I identify a RemoP10 switch?

Look for the separate control box and check for a serial number on its side beginning with EP10.

Is RemoP10 the same as RemoP20LR?

No. RemoP models use different control-box and identification arrangements, so the complete model and serial prefix must match.

What should I compare before ordering?

Confirm the model, EP10 serial prefix, control-box layout, five-pin plug shape and pin arrangement against your original system.

Recliner Replacement Parts Manual - FAQ’s 

Do you stock Pegar recline parts?

No unfortunately. Pegar handles have been obsolete for many years and we don’t stock any cables suitable.

How do you measure a recliner spring?

Recliner springs are measured by the overall length. You’ll find a break down of each recliner spring on each of the products pages. Simply click or tap on the “Measuring” tab.

Can I get a different shade brown?

No. There is only 1 colour brown available worldwide. There is no choice what shade of brown it is sorry.

My recliner handle measures 113mm x 70mm. Will your handles still fit?

Yes. There can be a couple mm tolerances in the measurements given.

My recliner handle measures 11cm x 7cm. Will your handles still fit?

Yes. Converted to millimetres is 110mm x 70mm.

How do you measure a recliner cable? You need to remove the trigger and cable from the recliner, disconnect the cable from the handle and use the Cable Cheat Sheet that is on the website.

How do I measure a recliner cable?

Click or Tap on the “Measuring” tab on the products page and follow the Cable Cheat Sheet to measure your cable correctly. Make sure you disconnect your cable from the handle before measuring. If you cable has broken the barrel off of the end, simply add that measurement, 3.5 or 6mm to the overall length measurement.

Can I pick up from your Coolum Beach Warehouse?

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au