Buy CouchGuard Permi Rub Leather Colour Restorer – 160g

Permi Rub Leather Colour Restorer

CouchGuard Permi Rub is a water-based, flexible colour restorer for suitable pigmented/finished and corrected grain leather with light wear, scratches or scuffs. Apply it in thin layers to build colour coverage and improve the appearance of worn sofa cushions, recliners and other suitable leather upholstery.

Each 160g jar is formulated and made in Melbourne by CouchGuard. Choose the colour option that best suits your project, checking the Colour Chart before ordering. Colour names alone do not guarantee a match to your existing leather.

Leather Colour Restorer Specifications

• Brand: CouchGuard.
• Product name: Permi Rub Leather Colour Restorer.
• Formula: water-based and flexible.
• Pack size: 160g plastic jar.
• Suitable surfaces: pigmented/finished and corrected grain leather, subject to condition and a test application.
• Application: sponge-applied, thin layers to build coverage.
• Indicative coverage: up to three seating cushions per jar; actual coverage depends on cushion size, damage and coats required.
• Drying guidance: approximately 30 minutes to touch dry; allow 24 hours before use.
• Origin: formulated and made in Melbourne, Australia.

Check Suitability Before Starting

Confirm the leather type and test the complete process on a hidden area first. This is a cosmetic colour-restoration option, not a replacement leather panel or a guarantee of permanent repair. Adhesion on oil-soaked areas may be poor, and badly deteriorated or delaminated leather may still need panel replacement.

If you are unsure about the surface, damage or colour, send CouchGuard clear photos before ordering.

How to Apply Permi Rub

1. Clean the area thoroughly with Leather Prep.
2. Lightly sand with 400-grit sandpaper, feathering the preparation out with 600-grit paper. Allow the prepared area to dry.
3. Use a sponge to apply an even, thin first layer and allow it to dry.
4. Repeat in thin layers until you achieve the desired coverage.
5. Where the repaired area does not blend closely enough, recolour the complete panel for a more consistent appearance.
6. Allow 24 hours to dry before using the furniture. Touch-dry guidance is approximately 30 minutes, not permission to use the surface immediately.

Frequently Asked Questions

What is Permi Rub?

It is CouchGuard's water-based, flexible leather colour restorer, applied in layers to improve the appearance of suitable worn or scuffed leather.

Which leather types is it intended for?

Suitable pigmented/finished and corrected grain leather. Confirm the leather type and test in a hidden area before applying it to a visible surface.

Can I use it on scratches and scuffs?

Yes, it is intended for colour restoration on suitable lightly worn, scratched or scuffed leather. Deep or structural damage may require a different repair method.

Will it permanently repair peeling or badly worn leather?

Not necessarily. It can offer a cosmetic improvement, but weakened, delaminated or badly deteriorated leather may still require panel replacement.

What size is the jar?

Permi Rub is supplied in a 160g plastic jar.

How much will one jar cover?

Indicative coverage is up to three seating cushions. Actual coverage depends on their size, the damage and the number of layers needed.

How do I choose the colour?

Check the Colour Chart and select the relevant colour option. A familiar colour name does not establish an exact match to your existing upholstery.

How do I prepare the leather?

Clean with Leather Prep, lightly sand with 400-grit paper and feather out with 600-grit paper. Allow the surface to dry before applying thin layers with a sponge.

Should I recolour just the damaged spot?

If the restored spot does not blend with the surrounding colour, recolouring the complete panel can give a more consistent appearance.

When can I use the furniture again?

Allow 24 hours after application before use. Approximately 30 minutes to touch dry is only initial drying guidance.

Can it adhere to oil-soaked leather?

Oil contamination can cause adhesion problems. Panel replacement is recommended where the leather is oil-soaked and a lasting repair is needed.

Where is Permi Rub made?

It is formulated and made in Melbourne by CouchGuard.

Leather Care - FAQ

I would like to know how much coverage each different size kits covers?

Simply click or tap on the “In The Box” tab on the products page. Thats the Leather Repair Kits page.

There are dark patches on my couch where the head would rest?

This is common with this type of leather. It is meant to develop the worn look over time. So what ever you spill or mark it with will add character to the leather surface. This includes body and hair oils. The idea of the care kit is to clean the leather surface before replenishing the oils and waxes back into the leather hide to prevent it from drying out.

Can I use your Leather Filler before applying the dye to fill some cracks?

No. You can’t use leather filler or our Leather Repair Resin and leather dye together. The Leather Dye is alcohol based so it will soften the filler or resin. If you have an aniline leather, then no filler just dye. If you have a finished / pigmented leather then you can use the resin or filler and leather colour, which is leather paint.

I have an Aniline Leather couch with cracking on the arms. Can I use the Leather Filler and Premium Leather Dye to repair?

No. You can’t use leather filler or our Leather Repair Resin and leather dye together. The Leather Dye is alcohol based so it will soften the filler or resin. If you have an aniline leather, then no filler just dye. If you have a finished / pigmented leather then you can use the resin or filler and leather colour, which is leather paint.

Can I use your leather dye on other surfaces like suede, canvas or timber?

Yes. You can use the Comprehensive Leather Care kit on all coloured leathers and not just white. This kit is designed for pigmented and finished leathers.

Can I use the leather cleaning kit on blue leather?

Yes. You can use the Comprehensive Leather Care kit on all coloured leathers and not just white. This kit is designed for pigmented and finished leathers.

I have badly worn / cracked seating cushion. Can I use your products to repair and recolour this damage?

Yes and No. Not all leather is repairable as such. Generally the seating areas along with the arm and headrest areas are damaged from body oils, perspiration etc. The leather has absorbed these contaminates over the years so getting a permeant repair is near impossible. Adhesion may / will be an issue or those areas will crack again with little use.

You may also want to look at using our Leather Repair Resin if you don’t want to do leather panel replacements.

If you do go ahead and repair badly damaged areas and the repairs fail, please don’t blame our products when this happens.

I want to recolour my 5 seater modular. Would 500ml leather colour be enough?

We say our Leather Dye is for leather but its up to you what you want to use it on.

What are the Leather Colour Changers and how do I choose the colours from the drop down menu?

The Leather Colour Changers are the pigments that make up the actual colour. For example, Beige is made from Ochre, Black and White pigment so you would receive them in the kit. White on the other hand is made from just White Pigment but you would receive Ochre, Black and Brown pigments. You can’t choose the actual colours. We provide the Colour Changers depending on what colour repair kit you order.

What does the leather paint end up feeling like after application?

The product is specifically for leather. After its applied, your couch will still look, feel and smell like leather.

Can I use this product on vinyl?

Yes you can use this on vinyl / bonded leather. Some, not all vinyls may need the Leather Sealer applied after if it feels tacky when dry.

I have your samples and one colour is the same but called something different. Can I still use your colour?

Certainly. It makes no difference what the colour is called, as long as it looks the same.

What does the LB and PL stand for?

LB is short for Lazy Boy and PL is short for Plush. This means we have match these colours to some of their leathers.

Can I use Acetone to clean the leather?

No. Acetone will will damage the components used during the tanning process and the fibre structor of the leather.

I’ve heard that once leather is dyed, it can feel harder?

Only if the leather is hard to start with. Our Leather Colour doesn’t change the look, feel or smell of the leather. You should apply our Leather Conditioner after the recolouring process is done and completely dry – approximately 24-48hrs depending on the climate.

How much leather colour is needed to recolour a couch and whats in each kit?

Click or Tap on the “In The Box” tab when you’re on the products page to reveal a detailed list of whats in each kit plus there is a “Coverage Ideal For…” under each kit.

Can I pick up from your Coolum Beach Warehouse?

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout.

You May Like To Add These Too

• Leather Prep A must before repairing and recolouring.
• Dulling Agent Adjust the finish.
• Deep Leather Cleaner Dirty leather needs cleaning.
• Leather Conditioner Apply once all done and dry.

Tips

Run water over the Leather Touch Pen tip then remove and turn around. This will help the paint to flow. Test for adhesion using the tape method. See the “Directions” for more detail. Dirty leather needs cleaning before prepping. Apply Leather conditioner to the hidden areas and crevices once all the recolouring is done and dry. This will stop the panels sticking together.

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au