Buy LINAK HB8X016-00 10-Button Medical Bed Handset

LINAK HB8X016-00 ten-button handset

Genuine LINAK ten-button hand control, listed for a matching multi-actuator electric medical bed. The existing listing identifies an RJ-45 style plug with a yellow O-ring. This is the ten-button HB8X016-00, not the four-button HB8X015-00.

Specifications

• Listed reference: HB8X016-00
• Button layout: ten buttons
• Listed connection: RJ-45 style plug with yellow O-ring

Confirm fit before ordering

Match the exact reference on the original handset, button symbols, plug and seal, and control-box model. A visually similar plug does not establish the same wiring or button functions. Send clear photos of the original handset, label and control-box reference if you need help checking.

Replacement guidance

Disconnect power and follow the equipment maker's service instructions. Photograph the original connection before unplugging it, never force a connector, and test the intended functions safely after replacement. Have medical equipment serviced by a qualified technician where required.

Frequently asked questions

Is this the four-button HB8X015-00? No. HB8X016-00 is the ten-button listing.

Will it fit any LINAK bed with an RJ-45 plug? Universal fit is not confirmed. Match the model, complete connector, button symbols and control box.

Does it operate all ten functions on every bed? Functions depend on the original control system; check the matching equipment documentation.

Recliner Replacement Parts Manual - FAQ’s 

Do you stock Pegar recline parts?

No unfortunately. Pegar handles have been obsolete for many years and we don’t stock any cables suitable.

How do you measure a recliner spring?

Recliner springs are measured by the overall length. You’ll find a break down of each recliner spring on each of the products pages. Simply click or tap on the “Measuring” tab.

Can I get a different shade brown?

No. There is only 1 colour brown available worldwide. There is no choice what shade of brown it is sorry.

My recliner handle measures 113mm x 70mm. Will your handles still fit?

Yes. There can be a couple mm tolerances in the measurements given.

My recliner handle measures 11cm x 7cm. Will your handles still fit?

Yes. Converted to millimetres is 110mm x 70mm.

How do you measure a recliner cable? You need to remove the trigger and cable from the recliner, disconnect the cable from the handle and use the Cable Cheat Sheet that is on the website.

How do I measure a recliner cable?

Click or Tap on the “Measuring” tab on the products page and follow the Cable Cheat Sheet to measure your cable correctly. Make sure you disconnect your cable from the handle before measuring. If you cable has broken the barrel off of the end, simply add that measurement, 3.5 or 6mm to the overall length measurement.

Can I pick up from your Coolum Beach Warehouse?

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au