Buy LINAK J90053 2-Button Foot Switch with RJ-45 Plug

LINAK J90053 two-button foot switch

Genuine LINAK two-button foot control for a matching LINAK system. The existing listing identifies an RJ-45 style connection with a yellow O-ring. Its button functions depend on the original equipment; do not assume this switch fits every medical bed or actuator system.

Listed details

• Reference: J90053
• Two-button foot switch
• Listed RJ-45 style plug with yellow O-ring

Check compatibility

Match the original J90053 reference, button symbols, full connector and seal, cable arrangement and control-box reference. A similar plug does not prove the same electrical wiring. Send photos of the old switch and control box if uncertain.

Replacement guidance

Disconnect power and follow the equipment manufacturer's service instructions. Photograph the original connections before unplugging, do not force a connector, and test from a safe position after fitting a confirmed match. Use a qualified technician for medical equipment where required.

Frequently asked questions

Is this FSL0W00000 or FSR0W00000? No. J90053 is a distinct two-button switch with a separately listed RJ-45 style connection.

Will the yellow O-ring guarantee fit? No. Match the exact reference and complete original system.

What does each button operate? Functions depend on your equipment; compare its original labels and instructions.

Recliner Replacement Parts Manual - FAQ’s 

Do you stock Pegar recline parts?

No unfortunately. Pegar handles have been obsolete for many years and we don’t stock any cables suitable.

How do you measure a recliner spring?

Recliner springs are measured by the overall length. You’ll find a break down of each recliner spring on each of the products pages. Simply click or tap on the “Measuring” tab.

Can I get a different shade brown?

No. There is only 1 colour brown available worldwide. There is no choice what shade of brown it is sorry.

My recliner handle measures 113mm x 70mm. Will your handles still fit?

Yes. There can be a couple mm tolerances in the measurements given.

My recliner handle measures 11cm x 7cm. Will your handles still fit?

Yes. Converted to millimetres is 110mm x 70mm.

How do you measure a recliner cable? You need to remove the trigger and cable from the recliner, disconnect the cable from the handle and use the Cable Cheat Sheet that is on the website.

How do I measure a recliner cable?

Click or Tap on the “Measuring” tab on the products page and follow the Cable Cheat Sheet to measure your cable correctly. Make sure you disconnect your cable from the handle before measuring. If you cable has broken the barrel off of the end, simply add that measurement, 3.5 or 6mm to the overall length measurement.

Can I pick up from your Coolum Beach Warehouse?

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au