Buy LINAK J14430 8-Button Medical Bed Handset

LINAK J14430 eight-button handset

Genuine LINAK eight-button hand control listed for a matching multi-actuator electric medical bed. The product photos show a round 8-pin plug connection. Match the full plug shape and keying, not just the pin count, before ordering. J14430 is not the separate six-button J11769 handset; a similar connector does not establish interchangeability.

Details from the handset label

• Brand: LINAK
• Item/reference: J14430
• Type: HB840000020004-200000002A1C000
• Label date: 2026.02.05
• Protection marking: IPX4 (as printed on the label)
• Made in Denmark; designed in Denmark
• Work-order reference: 36052549-0008
• Eight-button handset; round 8-pin plug as shown in the product photos

Check compatibility

Match the exact item and type on your existing handset, button symbols, the complete connector and its keying, and the control-box model. Button functions depend on the original system. The printed work-order reference is a label identifier, not a general compatibility guarantee. Send clear photos of the old handset, label, plug and control box if uncertain.

Replacement guidance

Disconnect power and follow the equipment maker's service instructions. Photograph the original connection, never force a plug, and test each intended movement from a safe position after fitting a confirmed match. For medical equipment, use a qualified service technician where required. The label warns not to open the handset by unauthorised personnel.

Frequently asked questions

Is this the six-button J11769? No. This label identifies J14430, listed as an eight-button handset; J11769 is a separate six-button model.

Does a round 8-pin plug guarantee fit? No. Match the original item/type, button layout, connector keying and control-box system.

What does IPX4 refer to? IPX4 is the marking printed on this handset's label; check the equipment maker's instructions for use and care.

Recliner Replacement Parts Manual - FAQ’s 

Do you stock Pegar recline parts?

No unfortunately. Pegar handles have been obsolete for many years and we don’t stock any cables suitable.

How do you measure a recliner spring?

Recliner springs are measured by the overall length. You’ll find a break down of each recliner spring on each of the products pages. Simply click or tap on the “Measuring” tab.

Can I get a different shade brown?

No. There is only 1 colour brown available worldwide. There is no choice what shade of brown it is sorry.

My recliner handle measures 113mm x 70mm. Will your handles still fit?

Yes. There can be a couple mm tolerances in the measurements given.

My recliner handle measures 11cm x 7cm. Will your handles still fit?

Yes. Converted to millimetres is 110mm x 70mm.

How do you measure a recliner cable? You need to remove the trigger and cable from the recliner, disconnect the cable from the handle and use the Cable Cheat Sheet that is on the website.

How do I measure a recliner cable?

Click or Tap on the “Measuring” tab on the products page and follow the Cable Cheat Sheet to measure your cable correctly. Make sure you disconnect your cable from the handle before measuring. If you cable has broken the barrel off of the end, simply add that measurement, 3.5 or 6mm to the overall length measurement.

Can I pick up from your Coolum Beach Warehouse?

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au