Buy LINAK FSE 1000020 Foot Switch Adaptor

LINAK FSE 1000020 foot switch adaptor

Genuine LINAK foot-switch adaptor for a matching LINAK foot-control arrangement. The existing listing describes a round eight-pin connection into the control box and use with the FSL0W00000 foot switch in a single-switch setup. This is an adaptor, not the separate FSE 1200020 foot wedge.

Check the original before ordering

• Match the exact FSE 1000020 reference on your original adaptor or equipment documentation.
• Compare the round eight-pin connector, the opposite connection, cable routing and the control-box socket. An eight-pin plug alone does not confirm electrical compatibility.
• If you are using an FSL0W00000 foot switch, compare the original single-switch arrangement. Do not assume this adaptor fits every LINAK control box or a multi-switch setup.

Replacing a matching adaptor

Disconnect the equipment from power and follow its maker's service instructions. Photograph and label the original connections before unplugging the adaptor. Fit only a confirmed matching part; do not force connectors. Test the intended foot-switch function from a safe position after reconnecting power. For medical equipment or uncertain wiring, have a qualified technician check the installation.

Frequently asked questions

Is FSE 1000020 a foot wedge? No. This listing is for a LINAK foot-switch adaptor; FSE 1200020 is a separate foot-wedge listing.

Does it have an eight-pin connection? The existing listing describes a round eight-pin connector to the control box. Match all original plugs and wiring before ordering.

Does it work with FSL0W00000? The listing describes use with FSL0W00000 in a single-switch setup. Verify your complete original arrangement first.

Will it fit every LINAK control box? Universal compatibility is not confirmed. Send photos of the original adaptor, plugs and box reference if unsure.

Recliner Replacement Parts Manual - FAQ’s 

Do you stock Pegar recline parts?

No unfortunately. Pegar handles have been obsolete for many years and we don’t stock any cables suitable.

How do you measure a recliner spring?

Recliner springs are measured by the overall length. You’ll find a break down of each recliner spring on each of the products pages. Simply click or tap on the “Measuring” tab.

Can I get a different shade brown?

No. There is only 1 colour brown available worldwide. There is no choice what shade of brown it is sorry.

My recliner handle measures 113mm x 70mm. Will your handles still fit?

Yes. There can be a couple mm tolerances in the measurements given.

My recliner handle measures 11cm x 7cm. Will your handles still fit?

Yes. Converted to millimetres is 110mm x 70mm.

How do you measure a recliner cable? You need to remove the trigger and cable from the recliner, disconnect the cable from the handle and use the Cable Cheat Sheet that is on the website.

How do I measure a recliner cable?

Click or Tap on the “Measuring” tab on the products page and follow the Cable Cheat Sheet to measure your cable correctly. Make sure you disconnect your cable from the handle before measuring. If you cable has broken the barrel off of the end, simply add that measurement, 3.5 or 6mm to the overall length measurement.

Can I pick up from your Coolum Beach Warehouse?

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au