Buy Mulin ML18-112A Recliner Footrest Actuator – 200mm Stroke

Genuine Mulin ML18-112A recliner footrest motor

Replacing your recliner footrest motor? The Mulin ML18-112A is a genuine slider-block actuator with a label-confirmed 200mm stroke, 18mm/s speed and 800N maximum force. Compare the complete model, mounting block and connections with your original before ordering. If you're not sure, send us photos and we'll help you check the match.

Electrical Specs

• Input: DC 28V
• Current: 2A
• Duty cycle: 2 minutes ON / 18 minutes OFF
• Indoor use only
• Connect only to a suitable Class II DC circuit, as stated on the label

Performance

• Stroke length: 200mm
• Linear speed: 18mm/s
• Maximum actuator force: 800N

The 800N figure is actuator force, not torque in Nm or chair occupant capacity. Follow your chair manufacturer's weight limit.

Dimensions & Build

• Complete actuator model: ML18-112A
• Style: sliding mounting block
• Fitted motor reference: ML18D06
• Motor label: 3900rpm, Class A

ML18D06 identifies the fitted motor, not an interchangeable complete actuator. Its rpm is motor rotation speed, not linear travel speed. Mounting lengths aren't given on the photographed label. Compare fixing points, block pattern, clearances and retracted and extended mounting lengths, centre to centre of pin where applicable. Keep the 200mm stroke separate from mounting and overall length.

Connections

Our listing identifies a two-pin power connection and a round five-pin connection. Compare both connector faces, gender, keying, polarity, pin layout and cable routes with your original. The same number of pins doesn't guarantee the same wiring.

Choose your option

Select Actuator Only or Actuator - Kit Form. If you're unsure what you need in the kit, contact us to confirm its contents before ordering.

Check the match and fit safely

Match ML18-112A, its stroke, mounting block, fixing dimensions, electrical ratings and wiring. Don't assume it replaces ML18-076, another Mulin motor or an Okin actuator simply because it looks similar. Plug-in replacement is suitable only when the full mechanical and electrical setup matches.

Need a hand? Call us on 1300 268 244 or email photos of your original label, complete actuator, mounting block and plug faces, together with measurements. Check switch, cable, power-supply and mechanism faults before assuming the motor has failed.

Disconnect mains power and any battery before replacement. Securely support the chair mechanism, keep clear of moving links and use a qualified repairer if unsure. Don't force plugs, modify wiring or connect the actuator directly to mains power.

Frequently asked questions

What is ML18-112A used for?

It's a replacement actuator for matching electric recliner footrest installations.

What is the stroke?

The actuator label specifies 200mm stroke.

What is its speed?

The label specifies 18mm/s linear speed.

What does 800N mean?

It's the maximum actuator force, not torque or occupant weight capacity.

What power does it require?

The motor label specifies DC 28V 2A and a suitable Class II DC circuit.

Can it run continuously?

No. Allow 2 minutes ON followed by 18 minutes OFF.

Which connections should I check?

Check the two-pin power and round five-pin connections against your original, including connector gender, polarity and wiring.

Will it replace an ML18-076 or similar motor?

Not automatically. Match the complete model, stroke, block, fixing dimensions and electrical installation.

Which options are available?

Actuator Only and Actuator - Kit Form. Ask us to confirm kit contents if you're unsure.

Can it be used outdoors?

No. The label specifies indoor use only.

Replacement Parts

CouchGuard supplies replacement parts for recliners, lift chairs and lounges, including electrical and mechanical components. Use the guidance below to help identify the correct part before ordering.

Price Match Guarantee

Found the same replacement part for a lower price from another Australian supplier? CouchGuard’s Price Match Guarantee applies to all part brands and types.

We compare the complete delivered price, not just the advertised part price. This means we compare the competitor’s part price plus delivery with CouchGuard’s part price plus delivery.

What qualifies?

• The competitor’s item must be the identical replacement part.
• The part must be currently in stock and available to purchase.
• The competitor must be an Australian supplier.
• The comparison must use the complete delivered price, including delivery charges.

How to request a price match

Have a link to the competitor’s product page ready so we can verify the part, availability, price and delivery charge. Call us on 1300 268 244, or contact us by email.

Before You Buy a Replacement Part

Replacement parts can look similar while having different model numbers, dimensions, connectors or mounting points. Before ordering:

• Check the original part for a manufacturer label, model number or part number.
• Compare the connector type, dimensions and mounting points with the product listing.
• Check the product description and compatibility guidance carefully.
• Contact CouchGuard with clear photos if you are unsure which part you need.

Additional Checks for Electrical Parts

• Check that the green light on the power supply is on.
• Check the leads and connections for visible damage.
• Check whether the switch is faulty.
• If possible, test the actuator in another compatible recliner.

These checks may help identify the fault, avoid replacing a working part and save you hundreds of dollars.

Selected Product Warranties

The following warranties apply to the listed products:

• 24-month warranty on all compatible actuators.
• 24-month warranty on all genuine Okin and TiMOTION actuators.
• 12-month warranty on all genuine Kaidi, eMoMo and Mulin actuators.
• 24-month manufacturer warranty on 6000mAh and 3950mAh batteries purchased on or after 11 September 2026.
• 12-month manufacturer warranty on the 2550mAh battery pack.

All actuators supplied by CouchGuard are tested by the manufacturer before leaving its facility. If a defect becomes apparent, contact us promptly with your order details so we can assess the product under the applicable warranty.

Warranty coverage is subject to our Purchase Terms and your rights under Australian Consumer Law.

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au