Buy Raffel 7051-SW3 Lift Chair Control Kit | Heat & Massage

Raffel 7051-SW3 lift chair control kit with heat and massage

The Raffel Systems 7051-SW3 REV B is a replacement handset-and-power-unit assembly for matching lift chairs with heat and massage. It combines chair movement, locking, heat and massage controls in a silver-coloured wired handset, helping you replace the matching control assembly rather than buying a handset alone.

What is included?

This listing is for the complete handset-and-power-unit assembly pictured, including its attached wiring and connectors. It is not a complete chair or a kit of replacement actuators, massage motors or heating pads.

Controls and features

• UP and DOWN chair movement buttons
• Central LOCK/UNLOCK button with lock symbols
• Dedicated HEAT button
• MASSAGE button with WAVE, STDY and PULSE mode indicators
• INTENSITY button with LO, MED and HIGH indicators
• Silver-coloured handset face with black buttons
• Round right-angle five-pin male plug
• Separate leads labelled HEAT, BACK and SEAT

Specifications and model references

• Brand: Raffel Systems
• Power-unit model: 7051-SW3 REV B
• Operating-instruction reference: HC 7051 3-SW
• Cable length: approximately 1.5m
• Power-unit input: 100–240V AC, 50/60Hz, 1.5A
• Power-unit output: 29V DC, 2.0A
• Product type: lift chair control kit with handset and power unit

Check compatibility before ordering

Match 7051-SW3 REV B against your original assembly and compare the handset layout, power ratings, five-pin plug, contact arrangement and every labelled lead. The instruction reference HC 7051 3-SW helps identify the control family, but it does not establish compatibility with every Raffel lift chair.

A matching pin count or similar handset appearance alone is not enough. Your chair must have compatible wiring, control requirements, massage components and heating equipment. This replacement assembly does not add heat or massage to a chair without those components.

For help checking the match, contact CouchGuard on 1300 268 244 with clear photos of the original handset, power-unit label, plug face, labelled leads and chair identification label. Tell us which functions have stopped working.

Replacement guidance

Disconnect the chair from mains power and any battery backup before replacing the assembly. Follow the chair manufacturer's instructions, match each labelled connection and never force a plug. Keep cables clear of moving mechanisms and pinch points. Do not modify mains wiring or open the power unit; use a suitably qualified repairer if required.

Frequently asked questions

What is the Raffel 7051-SW3 REV B?

It is a lift chair handset-and-power-unit assembly with chair movement, lock/unlock, heat and massage controls for compatible installations.

Is the power unit included or is this the handset only?

The handset and power unit are supplied together as the complete wired assembly pictured.

Which massage modes does the handset show?

The handset has WAVE, STDY and PULSE mode indicators, plus LO, MED and HIGH intensity indicators. These operate with the chair's compatible massage equipment.

Does it control heat?

Yes. It has a dedicated HEAT button and a lead labelled HEAT for the matching chair heating system. A compatible heating component must already be fitted.

What connectors should I compare?

Compare the round right-angle five-pin male plug and the separate HEAT, BACK and SEAT connectors with your original assembly. Match their housings, contacts, wiring and functions, not just their appearance.

What are the power-unit ratings?

The 7051-SW3 REV B power unit is rated for 100–240V AC input at 50/60Hz, 1.5A, with 29V DC, 2.0A output. These are the power-unit ratings, not a mains rating for the handset itself.

What does HC 7051 3-SW refer to?

HC 7051 3-SW is the reference on the Raffel lift control with massage and heat operating instructions. The power-unit label identifies this assembly as 7051-SW3 REV B.

Will it fit any five-pin lift chair?

No. Five-pin connectors can be used with different wiring and control systems. Match the full assembly reference, functions and connections before ordering.

Will replacing this kit fix every heat, massage or movement fault?

No. Damaged wiring, heating components, massage motors or chair actuators can cause similar symptoms. Identify the fault before ordering a replacement assembly.

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au