Buy TiMOTION TH1-1082-001 6-Button Bed Handset

TiMOTION TH1-1082-001 Six-Button Handset

Replace a matching hand control on an electric medical bed or lift-chair system with this TiMOTION TH1-1082-001 handset. The photographed casing is marked TH1-1082-001. This six-button hand control has a round eight-pin plug with a red O-ring. Match the original controls and full connector before ordering; similar-looking handsets are not automatically interchangeable.

Identification and connections

• Part marking shown in the photo: TH1-1082-001.
• Six-button hand control for a matching multi-actuator electric medical bed system, as identified in the product details.
• Connection: round eight-pin plug with red O-ring. Compare the plug face, keying and O-ring with your existing handset.
• Additional stamped number in the photo: 202510080002. Its purpose is not identified, so it is not used as the model number.

Check compatibility before ordering

Compare the TH1-1082-001 marking, number and symbols on the buttons, full plug face and keying, red O-ring and control-box connection with your original handset. An eight-pin count alone does not confirm electrical or functional compatibility. If anything differs, send CouchGuard photos of your old handset, its marking, the plug and the bed or chair control box for a fit check.

Frequently asked questions

What model is marked on this handset?
The photographed part is stamped TH1-1082-001.

What connection does it use?
A round eight-pin plug with a red O-ring. Check the full connector shape and keying against your original part.

Will any eight-pin bed handset work as a replacement?
No. Check the exact model, button layout, plug and control-box system before ordering.

What is the other number in the photo?
202510080002 is a second stamped number; the photo does not establish its purpose. Use TH1-1082-001 as the part identifier.

Recliner Replacement Parts Manual - FAQ’s 

Do you stock Pegar recline parts?

No unfortunately. Pegar handles have been obsolete for many years and we don’t stock any cables suitable.

How do you measure a recliner spring?

Recliner springs are measured by the overall length. You’ll find a break down of each recliner spring on each of the products pages. Simply click or tap on the “Measuring” tab.

Can I get a different shade brown?

No. There is only 1 colour brown available worldwide. There is no choice what shade of brown it is sorry.

My recliner handle measures 113mm x 70mm. Will your handles still fit?

Yes. There can be a couple mm tolerances in the measurements given.

My recliner handle measures 11cm x 7cm. Will your handles still fit?

Yes. Converted to millimetres is 110mm x 70mm.

How do you measure a recliner cable? You need to remove the trigger and cable from the recliner, disconnect the cable from the handle and use the Cable Cheat Sheet that is on the website.

How do I measure a recliner cable?

Click or Tap on the “Measuring” tab on the products page and follow the Cable Cheat Sheet to measure your cable correctly. Make sure you disconnect your cable from the handle before measuring. If you cable has broken the barrel off of the end, simply add that measurement, 3.5 or 6mm to the overall length measurement.

Can I pick up from your Coolum Beach Warehouse?

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au